When can you use your hazard warning lights?

Your hazard warning lights are when all your indicators flash at the same time. They are designed to be used as a warning to other road users. There are some common misconceptions about hazard warning lights and when they can be used, and if you are a learner driver you may be confused about what you’ve read in the Road Code and what you see people doing.

You must not use your hazard warning lights in the following situations because you should not create these situations anyway:

• You are parked blocking the pavement
• You have parked on a clearway or other no parking area

There are other scenarios where you should not use hazard warning lights, such as if you are driving slowly because you have a space saver wheel fitted, or simply to acknowledge another driver for something they did.

You should use your hazard warning lights when your vehicle becomes a temporary hazard to other people using the road, such as:

• if your vehicle has broken down
• if your vehicle is being towed
• when you are changing a tyre on the side of the road
• to warn people behind you that traffic has come to a halt, for example on a motorway when traffic might usually be moving fast, and there’s a risk that a vehicle might run into the back of you; or to warn others that you have stopped to assist with an accident
• if you are a heavy vehicle delivering goods and you are double-parked temporarily (this does not apply to light vehicles or motorbikes)

What are the rules for hazard warning lights on your car?

Cars and other light vehicles can have up to two pairs of indicator lamps both at the front and rear. Heavy vehicles can have up to three pairs either end. Motorbikes can only have one pair at the front and back.

Vehicles can have one or two side-facing indicators on each side.

An indicator must be mounted 1.5m above the ground or lower, unless the vehicle’s shape precludes this. Some vehicles have quite tall indicator lamps designed into light clusters, especially at the rear. In this case, they may be mounted up to 2.1m above the ground. On a heavy vehicle, only one of the pairs of indicators can exceed 1.5m above ground level and they must be mounted as close to the top of the bodywork as possible.

Turning on your hazard warning lights

Look for a button with a red triangle that is usually located near the middle of your dashboard. When you activate it you will see the green turn indicators flash repeatedly in your instrument cluster on your dashboard. All four indicators will flash in time with this and you should hear some kind of audible tone or click to let you know when the lights are flashing.

Your indicators will not work while your hazard warning lights are active.